KitchenAid Dishwasher Stops Mid-Cycle. How to Fix the Problem?

Does your KitchenAid dishwasher stop the mid-cycle? A dishwasher breaking in the middle of a cycle is a considerable inconvenience. Like any other gadget, the appliance is prone to breakups, malfunctions, and any other hitches related to dishwashers. The kitchen aid dishwasher isn’t exceptional.

While malfunctioning may happen once in a while, it is essential to have the technical know-how to deal with such hitches.  Here, we will teach why your kitchen aid dishwasher stops mid-cycle and the perfect remedy for this issue.

If this unfortunate hiccup happens, don’t panic. First, establish why your KitchenAid dishwasher stopped mid-cycle.

Why Does My KitchenAid Dishwasher Stop Mid-Cycle?

We have several reasons why your appliance is stopping before finishing its task.

Faulty Door Latch

A faulty door latch will not allow your kitchen aid dishwasher to operate a complete cycle. The latch is a security feature that latches to prevent your utensils from falling out. It has a microswitch that engages the door in place during the operation.

To check whether the door latch and switch function ideally, test the microswitch by activating it manually.  Essentially, the door will not close and latch in place if this particular switch is faulty. In most instances, you have to replace it to solve the issue. We recommend that you get a certified technician to do this for you.

Motor And Pump

Have you checked if the motor is working? What about the pump? These two are potential culprits when it comes to your dishwasher stopping mid-cycle. The engine is what runs your appliance. It is has got connectors to the power source.

If the motor ceases to receive power due to a mechanical fault, your dishwasher will stop immediately. Also, a power outage can be a cause of an impromptu shutdown. The first thing will be to check if there is power in your house before concluding that it’s a mechanical breakdown. 

If there is no supply or under supply of water into your washer, it will automatically stop. The water has to have enough pressure to work on your dishes.

Check if the pump pressure is functioning by turning on the faucet. A sufficient way to establish this is by checking for leakages. A faulty pump tends to be louder than usual. Note that if there is a water outage, your washer will also not function.

 Faulty Thermal Fuse

Inside your dishwasher is a thermal fuse. It has an indicator light on the front. If you find out that the light is not illuminating when you switch it on, that results from a blown-up fuse or tripped circuit breaker. A fuse protects the motor from damages by excess power. If it blows off, the motor doesn’t get power meaning the whole appliance shuts off.

 Electronic Control Panel

Your dishwasher’s control panel should last with the appliance. As we said, faults happen, and machines fail. If this panel is faulty, the timer will not run. This means the washer will not execute the correct functions to the washer.

Your dishwasher will shut down at the wrong time. To point out that the KitchenAid dishwasher is shutting mid-cycle because of a faulty control panel:

  • Check the other controls as well.
  • Try to press the stop, on, and off toggles to establish if they are functioning.
  • For a malfunctioning electric control panel, get a licensed technician to work on your dishwasher.
  • Do not attempt to fix control switches if you do not have the technical know-how.

 Faulty Dishwasher Fan 

The work of a fan in a dishwasher is to cool the washing chamber by removing the hot and moist air. The process happens after each wash cycle. If your washer skips this fanning process, your dishes come out wet. Your machine will finish faster than usual and therefore stop. If you had not preset it to skip the drying cycle, then check out if the fan is in good condition. 

 Faulty Thermostat

The fan and everything else is in perfect condition. What could be the issue? The next culprit could be the thermostat. It turns off the heating element to prevent the dishwasher from overheating. A slight malfunctioning will turn off the appliance prematurely. A multi meter will rescue you out if you want to check out whether it is the thermostat.

How Do I Run A Diagnostic On My KitchenAid Dishwasher?

Running a KitchenAid dishwasher diagnostics will help you find faults and to solve the issues amicably. The first thing to do this is to put your model into a service mode. This will pick and solve the problem. There are two options available for you;

Option One

On the control panel, you will find this sequence:

  • HEAT DRY,
  • NORMAL,
  • HEAT DRY,
  • NORMAL,

Once you press the toggles, the display will light up. Go ahead and press start. This will start a test cycle. It will also prompt the dishwasher to run through all the functions.

Option Two

On the control panel, press this sequence

  • 123,
  • 123,
  • 123,

 The process will successfully light up on the panel. Press Start toggle to commence the test. The procedure should run a diagnostic for your dishwasher.

 In both options, if an error code is detected KitchenAid dishwasher will display on the control panel. You can go ahead and conduct the troubleshooting procedures depending on the model.

Do KitchenAid dishwashers have a reset button?

KitchenAid dishwashers do not have a reset button. Instead, the washer has a reset sequence, where you press several buttons in a row to reset. These buttons will depend on the model.  A more straightforward formula for resetting your KitchenAid dishwasher is to disconnect the appliance from the power supply.

Allow it to stay for a few minutes and then reconnect. Start a new wash cycle. That will have rebooted your dishwasher.  An alternative is to long-press the Cancel or Cancel Drain toggle. The simple procedure will cancel and reboot the entire cycle.

Our best recommended dishwashers

hOmeLabs Compact Countertop Dishwasher - Energy...40
  • A convenient and small Energy Star certified dish washing machine for...
  • With simple to use control panel and light indicators. Program...
  • Features a quick connect assembly with accessories including inlet and...
  • Using the rinse aid dispenser, you can dry your plates, mugs, and...
  • This counter top appliance measures 17.2 x 19.6 x 21.6 inches with 6...

Bottom-line

Dishwashers last for many years, but malfunctions can occur occasionally. Whenever your dishwasher stops mid-cycle, remember that it could be a troubleshooting or mechanical issue. You need to do a reboot or check if the interiors are working.

Suppose you notice that the malfunctioning results from a mechanical problem, get the services of a qualified and licensed technician. Your appliance will get the required attention and effectively serve you.

Leave a Comment