How To Clean Ninja Blender | Read These 6 Tips

Cleaning or washing ninja blender is always an annoying and time-wasting matter for most blender users.

Primarily, it is more exhausting and time-wasting matter for those who’s doesn’t know how to clean ninja blender?

We all like smoothies, sauces, coffee, purees, and different types of juice. That is why we are using blender a lot for making those types of foods or drinks.

But are we give sufficient time to clean it? Not!

When I used ninja blender for the first time, I had faced a lot of hesitation because I did not know how to clean a ninja blender? Finally,

I can find out the easiest ways to clean ninja blender and how to keep it free from smell, stains, foggy, or germs? I sure you may want to know about how to clean ninja blender? Here, I have shared my practical experience with you.

So keep reading until the end to learn a lot of tips and tricks to clean ninja blender.

Related articles 

1. The A – Z Of Ninja Supra Kitchen System Review 2020 And Buying Guide

2. 12 Best Magic Bullet Replacement Parts and Accessories

Equipment needed:

  • Earm water
  • Doapy water
  • Sponge or towel
  • A dishrag or wipe
  • Doarsely chopped lemon
  • Detergent
  • Vinegar
  • Baking soda[ not compulsory]
  • Mild dish soap cleanser

How To Clean Ninja Blender

Step by Step guideline:

A ninja blender has a cup, blades, gasket, motor, base, seal, lid, etc. to clean. Before cleaning the blender, separates each part from each other with care.

In the below, I have explained how to clean every part of a ninja blender, and also I have explained some separate ways to clean a ninja blender step by step. By reading all tips, apply it in your real life.

How to clean a ninja blender power base:

Cleaning ninja blender power base can be more natural in the event you would like to clean your power base, Fist disconnects the blender power base from power. Then with a damp sponge, wipe the outside and inside any liquid or struck-on-mess.

Using a brush dipped in warm soapy water, give the base a light scrub. Then, scrub the power base actuators. When clean, use a sponge or tower.

How to clean ninja blender gasket:

For cleaning ninja blender rubber gasket, you don’t need to pay much attention. You can usually clean it. Cleaning gasket with hand-wash is always suitable for the blender.

You know the blender’s gasket should always remain flexible. Make sure your blender’s gasket is flexible, pour some vegetable oil or a tablespoon of olive oil over the gasket of the blender.

How to clean ninja blender blades:

For cleaning ninja blender blades, first, take a brush. Then soak the brush in the white vinegar or soapy water. Then brush your blender’s blades with it. This way, they will be neat and clean, like new.

Please, don’t try to do these quickly because you can cut your hand by blender’s blades. Never try to sharpen the blades, if blades assemblies are damaged, never try to use them. Without attaching the blender’s cup, never put blades assemblies on the blender’s base.

If the blender is extremely dirty, separate the blades from the blender, soak the blades in two polident tablets mixed water for half an hour.

You can stay doubtless about the clearing of blender’s blades because the polident tablets can clean any tough stains.

How to clean ninja blender seal:

You can clean your blender’s seal easily, for cleaning seal, you don’t need to pay much attention. Usually, you can wash it with water.

How to clean ninja blender base:

To clean the blender base, first, take a towel and soak it in the warm water until it becomes damp. Then wipe those places of your blender base where food and liquid are stuck. But It will be better if you can wipe the whole base.

Try to wipe the blender base slowly, because if you want to do it quickly, food and liquid stuck could stay and hurriedness could call dangers for your blender’s base.

How to clean ninja blender handle:

The cleaning blender’s handle is secure. First, take some warm water and mixed it with some liquid soap. Then wash the handle of the blender with the mixture.

Then wash the handle under the running water. At last dry, the handle by a towel or keep it under air.

How to clean ninja blender lid:

For cleaning the lid, take some warm, soapy water and a toothbrush. Then, soak the lid into the water for a few minutes. Then rub the lid top-to-bottom and inside-outside with the toothbrush. After rinse the lid under running water and dry it in the air.

How to clean ninja blender cups:

Fill the blender cup with halfway warm water. Then add 4-5 drops of liquid detergent in it and blend it until the cup is thoroughly clean. Then rinse it with water until pouring out the mixture.

You can clean the cup another way. Take half a cup of water, a few drops of dish soap, some coarsely chopped lemon (or a few drops vinegar), and make a mixture.

Then pour the mixture in the blender cup and blend the mixture for 30 seconds to a minute.

After that, if any stains stay, then take a toothbrush, take some water and dish soap in the blender‘s cup, and then rub the cup inside-outside by the toothbrush until disappearing all the stains away from the cup.

Another way, make a mixture of vinegar, liquid dish soap, and half a cup of baking soda. Then put the mixture into the cup and blend the mixture. Let the mixture for a few hours.

After then, rinse the cup by dish soap and water until it is neat and clean. Dish soap and water will remove the smell of the vinegar, baking soda.

How to clean ninja blender motor base:

Cleaning the ninja blender motor base is very easy. To clean the blender motor base, at first, you have to disconnect the motor base from the electricity. Then wipe the motor entirely with a moist towel.

Continue to wipe the motor base until it becomes clean beautifully. Keep in mind, never put your ninja blender motor base in the water or any other liquid substances and never put your ninja blender motor base in the dishwasher because it is a harmful and unsuitable ninja blender.

How to clean ninja blender by vinegar:

Cleaning blender by using vinegar is very easy, but it may smell bad. For a deeper clean or a naturally clean, mix 2 cups of warm water with half-cup of white vinegar.

Then, blend the mixture for a minute. After blending, put appliance under the running water and rinse them entirely.

You must know, vinegar is one kind of chemical materials. It is advantageous to clean kitchen appliances. But it has some disadvantages.

How to clean ninja blender by mixing detergent with coarsely chopped lemon:

For cleaning blender with lemon and detergent, fill your blender with halfway with water and a few detergent drops. Then, add a few pieces of coarsely chopped lemon with it.

Then, blend the mixture for 30 seconds. Now, you can see there are no stains in your blender. Then, wipe the blender with a dry towel or sponge.

Some extra tips for making your ninja blender more neat and clean:

Now you know how to clean a ninja blenders’ power base, gasket, blades, seal, handle, lid, cup, motor base etc easily and quickly. To make your ninja blender more neat and clean and finding the best services from your blender follow below tips and tricks.

• You will find some special cleaning tips in your owner’s manual. So, check it before cleaning your ninja blender.

 • Always try to clean plastic and glass blender by hand because if you wash it in the dishwasher, it can be damaged by the dishwasher.

Moreover, hand-washing is a more comfortable, safer, and faster way to keep your blender clean and beautiful.

 • Clean every part of the blender separately. Give special attention when you clean your blender. Don’t feel any hesitation or boring to clean blender.

 • As much as possible, refrain from making smelly food by using a blender. Always use detergent or lemon to remove ill-smelling.

I hope following the above tips and tricks you will be able to clean your ninja blender. But due to regular use or excessive use, ninja blender blades can be damaged or dull or useless. It is usual.

If your ninja blender blades become dull, don’t throw them in the dustbin or you need not buy them newly. Because you can sharpen your ninja blender easily and quickly. To find some unique tips and tricks about how to sharpen ninja blender blades? Visit: How to sharpen ninja blender blades?


1. Is Ninja blender dishwasher safe?

Is ninja blender dishwasher safe? It is a frequently asked question, and also it is a very important question to know for all ninja blender users. For finding the best service from a ninja blender, every ninja blender users have to know this question answer.

A ninja blender all parts are not dishwasher safe. You can clean your ninja blenders’ lid, handle, gasket, seal, and blades in the dishwasher because they are dishwasher safe, but ninja blender motor base and the power cord is not dishwasher safe.

How to clean a ninja blender motor base and power cord? Both questions answer has been given in the above. To find both questions answer, please read the above information further.

2. Why is my ninja blender not turning on?

Why is my ninja blender not turning on? It is also a frequently asked question from ninja blender users, especially from the new users. There can be a few reasons behind not turning on your ninja blender.

Below I have enlisted most 5 important questions for you. If you can find out these 5 questions answer, your ninja blender will be turned on obviously.

  • 1. Did you plug up your ninja blender?
  • 2. is your ninja blender is operational?
  • 3. Has your ninja blender worked in the past?
  • 4. Is your blender clean perfectly?
  • 5. Is your electric cord  okay?

The above five questions answer your ninja blender will be turned on a hundred percent guaranty. If there are too much sugary substances in your ninja blender, the blender will not turn on if you can confirm.

Visit my article: How to turn on ninja blender and why won’t it turn on?

3. Where to buy a ninja blender?

You can  buy ninja blender in the supermarket, shopping markets, online, and many other local shops. If you really purchase a ninja blender,

My recommendation is for you to buy it from online market . I hope you will find there a collection of different replacement parts of your brand and model and will reach your home without any hassle when ordering.


Though cleaning ninja blender is annoying and time-wasting task for almost everyone, but for maintaining a healthy life you should clean your ninja blender before use, and after use. I hope you have already learned how to clean a ninja blender?

Following the above tips and tricks, and applying your own tactics, you can clean your ninja blender easily and comfortably.

Have you any question about cleaning ninja blender? If you have any question, let me know by leaving a comment. I will answer your comment with affectionate care.

Leave a Comment